Obd2 Scanner Elm327 Usb Retrofit For Ford Elmconfig Latest Chip Hs-can Forscan

Obd2 Scanner Elm327 Usb Retrofit For Ford Elmconfig Latest Chip Hs-can Forscan

Basic Features:

Reset fault /trouble codes / parameter ids (PIDs)
Change car configuration data
Run tests
Services procedures
Program certain models
 

Pin Configurations:

Switch position one: HS CAN - Occupies pins 6 and 14
Switch position two: MS CAN - Occupies pins 3 and 11

Supported Software:

FORScan
Elmconfig
FoCCCus
FF2
Plus more

Modified EML:

Please note that many  for FORD and Mazda models (approximately since 2003-2004) are equipped with MS CAN bus, in addition to the regular HS CAN bus. In contrast to HS CAN bus, MS CAN bus is not supported by the stock ELM327, because MS CAN

is a manufacturer-specific solution and located on non-OBD2 pins. This ELM327 has been modified to allow it to implement the MS CAN bus.
ELM327 supports HS CAN from the stock, because  for FORD HS CAN completely matches to the OBD2 standards. It occupies pins 6 and 14. MS CAN bus occupies pins 3 and 11.

Supported Vehicles:

All for FORD, Mazda, Lincoln, Mercury vehicles that can be addressed using an ELM via an OBDII connector.

Supported Protocols:

For FORD HS CAN

For FORD MS CAN